Poole, Dorset
The Seldown eco-village in Poole Dorset is being developed by Western Challenge Housing Group. The original design allowed for solar collection by including roofs at 30 degrees, facing due south, but cost constraints meant that t the tendering stage solar thermal was not included. Shortly before going on site, Solartwin made a presentation to Western Challenge, who were impressed by the simplicity surprised at modest cost of Solartwin. They asked for six systems to be installed on the upper floor of two blocks of one and two bed roomed flats.
Simple Plumbing
We connected the Solartwins directly on to open vented thermal stores, which in a new build situation have a number of advantages.
The Solartwin’s will deliver hot water to the top of the cylinder as would usually be the case with a standard open0vented domestic hot water system.
Solartwin also provides mains pressure hot water at flow rates comparable with combination boilers or unvented cylinders but without the expense of annual maintenance.
As the water in the cylinder that the panel is circulating is not going out to the taps, we were able to overcome water hardness by treating it with Fernox MB-1 scale inhibitor., mixed to 4% of the total storage volume,
Special roof mounting
Solartwin worked closely with the roofing and main contractors to design a bespoke mounting system, which the roofing contractor could integrate into the polymeric roof covering without affecting the integrity of the rood surface. Structural engineers’ calculations showed that Solartwin panel raised 10mm above the roof would produce a wind loadings well within the limits of the timber frame and insulation construction.